Entertainment
Software

Small, sleek and very powerful, the ActiveEye Wireless Motion Sensor (MS13A) supercharges any home and lifestyle by removing the need for switches and buttons. Now with adjustable time delay and more enhancements!

• Simple-to-Use, Adjustable time delay! Set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room or turn off the lights! Simply pull the tiny cap off the top of the motion sensor (see above photo), then turn the adjustable switch for how long you want the delay before it turns off! (1 min to 60 minutes max). For example if you set it at the half way point; When motion is detected, your light would come on then turn off 30 minutes later.
  
• Easily disable the dawn/dusk feature so it will work 24 hours/day! Sensor is set to detect motion at all times as the default. Then, you can easily enable the dawn/dusk feature so lights only come on when its dark and turn off when there's light.
  

HOW IT WORKS
The ActiveEye Motion Sensor (MS13A) sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring.

These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home.

If you set the ActiveEye Motion Sensor (MS13A) to a unique code (House Code A and Unit Code 1), then walk into the room where the ActiveEye Motion Sensor (MS13A) is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select.

The signals transmitted onto your house wiring can also be received by the two-way Computer Interface (CM11A) to initiate macros. The Computer Interface then performs a sequence of events that you've set it up to do.

SPECIAL FEATURES

• You can easily disable the dawn/dusk feature so it will work 24 hours/day! No need to cover photo-cell with black tape.
• It has adjustable time delay! You can set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room (The old version had only 1 setting of 6 minutes).
• Weather resistant case protects the sensor from the elements.
• Locking screw prevents easy removal of batteries.